Nanyang explosion-proof motor | Precautions for maintenance of explosion-proof motors

2023-11-23 08:05:51

Explosion proof motor is a type of motor with explosion-proof performance, suitable for flammable and explosive places. Proper maintenance can extend the service life of the motor, improve work efficiency, and reduce the risk of accidents. The following are some suggestions for maintenance precautions of Nanyang explosion-proof motor for your reference:

1. Regular cleaning: The surface of explosion-proof motors should be cleaned regularly to prevent dust, oil, and other substances from interfering with motor operation. When cleaning, a soft cloth should be used to wipe, and strong irritating solvents should not be used.

2. Regular lubrication: The bearings, transmission devices, and other components of explosion-proof motors need to be lubricated regularly. Suitable lubricants should be selected for lubrication based on the motor model and usage conditions, and lubricants should be added and replaced according to the requirements of the user manual.

3. Check electrical connections: Regularly check the wiring, grounding, and other electrical connections of the motor to avoid poor contact, short circuits, and other issues.

4. Regularly check insulation performance: Low insulation resistance may lead to a decrease in motor insulation performance, increasing the risk of leakage and fire. Therefore, the insulation resistance of the motor should be regularly checked to ensure its safety and reliability.

5. Check the motor temperature: By observing and measuring the temperature of the motor, it can be determined whether there are overload, overheating, and other issues with the motor. If the temperature of the motor is found to be too high, corresponding measures should be taken in a timely manner, such as cleaning the radiator, adjusting the load, etc.

6. Regular inspection of explosion-proof performance: The explosion-proof performance of explosion-proof motors is one of its important characteristics, and the condition of explosion-proof equipment should be regularly checked to ensure its normal operation. For example, check the integrity of components such as explosion covers and explosion-proof cable clamps, and check for corrosion, damage, and other phenomena.

7. Pay attention to the usage environment: Explosion proof motors should be used under conditions that meet the requirements of the usage environment, to avoid environments that affect the performance of the motor such as excessive wetting and drying.

8. Prevention of motor overload: Avoid prolonged overload operation and avoid damage to the motor due to power overload or overload operation. At the same time, attention should also be paid to load balance to avoid a single motor enduring excessive loads for a long time.

9. Regular maintenance: Regular maintenance is an important measure to maintain the normal operation of explosion-proof motors. Regularly check the various performance indicators of the motor, such as voltage, current, speed, etc., to ensure that they are within the normal range.

10. Spare parts: Properly reserve some commonly used spare parts, such as bearings, seals, etc., for replacement when needed. This can improve maintenance efficiency and reduce downtime.

Nanyang explosion-proof motor tells you that the maintenance and upkeep of explosion-proof motors is the key to ensuring their normal operation and preventing accidents such as fires. The adherence to correct maintenance methods and precautions can extend the service life of the motor, reduce the risk of failure, and also play an important role in maintaining production safety. Therefore, when using explosion-proof motors, it is necessary to pay more attention to their maintenance and strictly follow the relevant requirements for operation.